1. Standard Fiberhome OLT AN5516-01 OLT configuration:
1) 1 AN5516-01 Chassis
2) 2 HSUA control board
3) 2 PWRD DC Power board
4) 2 Uplink Card
5) 1 FAN
6) Power cable & Accessories
2. Key Features:
2.1 PON features
1) Unify platform for EPON/GPON/10G PON/P2P
2) Sharing service cards with AN5116-01
3) Up to 256 PON ports per chassis
4) Flexible uplink card :2*10GE+2*GE,1*STM-1, 32*E1
2.2 Reliability features
1) Core card 1+1 redundancy
2) OSPF dual homing
3) STP/RSTP/MSTP ring protection
4) Trunk/LACP for uplink protection
3. Product Specifications:
Uplink Interface |
Up to 2*10GE+ 2*GE optical uplink with SFP Up to 6×GE optical uplink with SFP |
PON Port Interface |
GPON port complying with Class C+ for ODN EPON 1000BASE-PX10/PX20 port for ODN Up to 60km Max Reach SC/PC Connector Support G.652/G.657 Single mode Fiber |
Optical Line Rate |
Upstream/Downstream data rate: 1.244G/2.488G for GPON Upstream/Downstream data rate: 1.25G/1.25G for EPON |
Service |
Ethernet service CATV service NGN voice (MGCP/H.248/SIP) TDM service Broadcast services for IPTV VOD unicast |
Core Switch Capacity |
14.8Tbps |
Capacity |
20 slots & 16 service slots |
Capacity (Per service card) |
8/16 PON ports per EPON service card 8/16 PON ports per GPON service card |
Environment Requirement |
Operating temperature: -10°C~55°C Storage temperature: -40°C~65°C Ambient humidity 5%~95% |
Dimensions (W*D*H ) |
480*475*260mm |
Chassis weight (Fully Loaded) |
35kg (Full Loaded) |
Wavelength |
TX 1490nm(1550nm)/ RX 1310nm |
Power Consumption (full configured) |
880W (Full Loaded) |
Power Supply |
-48V DC ( -40V~ -57V) (Two power cards per subrack for redundancy) |